Level / Leak detections
4100-LEV Full display Level Monitor
The 4100-LEV provides continuous level monitoring of liquids and bulk solids. The 4100-LEV unique level system provides complete flexibility for monitoring one or more tanks in one complete package.
The 4100-LEV sensing probe monitors the capacitance field between the probe and it’s concentric shield of the tank wall. As the level of product increases, the probe capacitance changes. This level signal is used to provide outputs, displays and relay control.
4100-LEV Datasheet
Literature
2852-LT Remote Mounted Level Transmitter
The 2852-LT Remote Mounted Level Transmitter provides reliable level monitoring of liquids and solids for measurement and control. The unit continuously monitors the liquid or solids level in a tank, stand-pipe or containment. Outputs include analog, digital, and relay control for interface to alarms, valves, pumps and other process monitoring equipment.
The 2852-LT sensing probe monitors the capacitance field around the probe. As the product rises in the tank or vessel the probe capacitance increases. This change is used to provide a 4-20 mA proportional output and two setpoint alarm relays. on can be set using any two points along the probe length.
Literature
2852-LT Datasheet
A Full Featured Reverse Osmosis Controller for Small RO systems.
Features:
-
Powers up to 2HP Motors @ 240VAC (1HP @ 120VAC)
-
Permeate TDS, Feed TDS and % Rejection
-
Extensive Flush Options
-
Fully Programmable
-
Low Cost Custom Graphics Available
2852-DPM Dry Pump Monitor
The 2852-DPM Dry Pump Monitor offers pipe monitoring for dry conditions to protect pumps and equipment. Combining the technology of capacitance with unique sensor designs provide non-intrusive monitors for liquid handling systems. The result is a low cost and low maintenance system to determine the presence or absence of product in a pipe or pump.
The Dry Pump Monitor observes a cross sectional area of the pipe and locks in on the capacitance field of the fluid passing through. A change toward a dry condition or a liquid of a different dielectric will upset the capacitive field and initiate an alarm.
The sensing plates are embedded into a wafer flange which provides monitoring without any intrusion into the stream flow.
Literature
2852-DPM Datasheet
2852T-ILA Interstitial Leak Alarm
The 2852T-ILA Interstitial Leak Alarm provides reliable monitoring of the interstitial space in double wall tanks. Leaks from above or underground storage tanks can be costly, dangerous to worker health, and environmentally unsafe. Arjay provides sensors to monitor for leaks and spills. Probe variations can extend these applications to meet your specific needs.
For double walled tanks, above or underground, the Interstitial Leak Alarm is designed to alarm on a dry vs. wet condition within the walls. This unit will alarm from a leak within the internal tank or from an outside leak into the wall cavity.
Literature
2852T-ILA Datasheet
2852-LPS Area Leak Alarm
The 2852-LPS Area Leak Alarms provides reliable monitoring of liquid leaks in containments and floor spaces. The Leak Pad Sensor (Area Leak Alarm) can be placed on containment floors and pans to alert on a dry vs. wet condition. These can be placed around a tank, in electrical and computer vaults, and in pump stations.
The 2852-LPS sensor monitors the capacitance field between the sensor pad and the floor. A single push button calibration at the controller locks in on the capacitance field of all sensing pads. Any liquid that intrudes into the pad space will increase the capacitive field and initiate an alarm.
Literature
2852-LPS Datasheet
Find all options on the Arjay website: